Orio Box
Indoors box camera with a range of lenses
Orio is Intellio's entry level, reasonably priced model family with a resolution of 1.3 (1280 × 960) megapixels. Thanks to Intellio’s Video Codec image transfer, the camera will only forward signals if an event is detected – this will economize on system requirements. Orio cameras are equipped with the most important on-board detectors and intelligence.
This is an end-of-life camera model, not produced anymore. Find our newer ’box’ CCTV camera types below.
Mainly designed for indoor use, this box type model is available with a range of lenses. The camera’s highly sensitive, physical day/night switch, built-in bandwidth selection and integrated intelligence help versatile use.
- Physical day/night switch
- 0.45/0.01 lux sensitivity
- 1280 × 960 definition
- MJPEG / IVC / H264
- 12 VDC, PoE
- Sensor: Aptina 1/3” CMOS, 1.3MP
| Camera | |
| Image Sensor | Aptina 1.3 MP, WDR, 1/3” CMOS Progressive Scan |
| Sensitivity | Day/Night: 0.45 lux / 0.01 lux |
| Shutter time | 1/6 s – 1/20,000 s |
| Day/night mode | TRUE |
| Lenses (optional) | 1/3” format, C/CS mount, DC iris, megapixel resolution |
| Image | |
| Resolution | 1280 × 960; 640 × 480 |
| Frame Rate | 20 fps (IVC 1280 × 960), 25 fps (IVC 640 × 480), 12 fps (MJPEG 1280 × 960), 18 fps (MJPEG 640 × 480), 8 fps (H.264 1280 × 960), 14 fps (H.264 640 × 480) |
| Image Settings | Brightness, Exposure Control, Gain Control, Anti-flickering (50Hz/60Hz), Saturation, Contrast, Gamma, Day/Night mode (Auto/Day/Night), Preferred Day/Night Mode, Sharpness, Noise Filtering, Image Mirroring |
| Encoder Settings | Codec Type, Quality, I-frame Distance, Block Sensitivity, Resolution, Frame Limit, Reduced Frame Rate Control, Bandwidth Limit, Pre- and Post-alarm |
| Compression | |
| Video Compression | Intellio Video Codec (IVC), H.264, Motion JPEG |
| Bitrate | 32 Kbps – 12 Mbps |
| Streaming | Intellio Video Streaming, Dual streaming over RTSP |
| Interface | |
| Ethernet | 10BaseT/100BaseTX, RJ-45 |
| IO Ports | 6 Pin IO Connector (1 Output (2 Pins), 1 Input (2 Pins), GND, AUX Voltage |
| Reset Button | Reset To Factory Defaults (IP Address Reset) |
| Network | |
| Protocols | NTP, TCP/IPv4, DHCP, DNS |
| Security | Camera User Name and Password |
| General | |
| Operating Conditions | 0 °C – 50 °C |
| Power Connector | Screw Fixable Terminal Blocks | Accessory: Power connector (DC jack 5.5 mm / 2.1 mm) |
| Power Supply | 12 V DC (+2 V, -3 V), 400 mA / PoE Support (IEEE 802.3af – PoE Class 1) |
| Power Consumption | Max. 4 W |
| Weight | 380 g (without lens) |
| Certificates | CE: EN 55022, EN 55024, RoHS compliant |
| Camera software | |
| Motion Detection | 64 polygon per mask, 8 masks, All masks with adjustable sensitivity and motion percent parameters, Separated motion detector for monitoring and for recording |
| Intelligent video | |
| Detectors | Motion Detector, Tampering detectors: Covering detection, Rotation detection, IO port input detector |
| Extended Intelligence | Tracker based detectors: Intelligent motion detection, Tripwire detection, Entry detection, Direction detection, Object based detector: Object removal / theft detection |
| Object Tracker | 64 polygon for masking, Object behavior settings, Day-time/Night-time sensitivity, Environmental settings |
LINKS & DOWNLOADS
Product description (pdf)
Step by step installation guide
User’s manual for the camera web interface
The latest firmware for Orio cameras